Tips For Replacing a Window Handle
It is simple to change your window handle in the at-home comforts of your home. Follow these handy tips for smooth operation and a stunning look.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Then measure the spindle length to ensure that you get the correct size replacement.
1. Determine the Spindle Length
It is essential to have the right size spindle when replacing a window handle. This is because it could affect how tight or loose the handle is and whether it locks correctly inside the frame of the window. The spindle is the metal shaft that connects the handle as well as the lock in the window frame. The spindle is available in either the standard 8mm industry cross-section or the more traditional 9mm versions. The modern industry standard is 8mm, but this was not always the case, so when purchasing a new handle, it's essential to check the dimensions.
Remove the handle. This is done by turning the handle into the open position and unwinding two screws that secure the handle (which are often hidden behind plastic caps which must be removed). Once the handle is removed, measure the distance from the base to the point at which it ends. This will give you the measurement required to purchase a replacement.
There are many options when it comes to choosing a new window handle from sleek chrome that fits into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail locks! The possibilities are endless, but the most important thing is to choose a style that suits your home.
Espag handles are typically used to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles can vary between 58mm and 62mm however luckily there are replacements available for both sizes. Window handles made of Cadenza have a different size because they have an angled blade which operates an interlocking mechanism that is multi-point inside the window.
Another factor when choosing the best window handle is determining what hand you need to use. This is determined by what hand you use to open the door. Inline espag handles are compatible for left or right-handed windows. Cranked window handles are handed and are only used on windows that open in only one direction.
2. Take the handle off
A window handle that falls out can be frustrating, regardless of whether the handle is damaged or worn out. But the good news is that replacing the uPVC window handle is a very easy task that you can complete yourself. You only need some basic hand tools and time to complete this process.
First of all, you have to open the window and make sure that it is in the unlocked position. Then, remove the screw caps that hold the handle in position. Once these caps are removed, you can start to work on removing the handle itself.
The handle itself is attached to a spindle in the window frame. This is either fixed by a pin or a screw, depending on the type of handle. The most common handle types are inline Espagnolette handles and handles with cockspurs. Both kinds of handles can be found on casement windows including aluminum ones. You can lock the handles by using a key to prevent unauthorised access from outside. You can also lock the handles by turning them clockwise.
To remove the handle, you'll need a flat blade screwdriver to release the clip holding the handle. After this is released, the handle will fall off the spindle. After the handle has been removed, you will have to determine the length of the spindle to ensure that your new handle is compatible with this size.
Once you have the right size, you can now put the new handle in the correct position. It is important to make sure that the handle is securely attached and rotates in the correct direction (clockwise in the case of an open, or counterclockwise if the handle is closed). It is essential to ensure that the handle has not been placed upside down.
Then, you must replace the screw cover caps. After you've completed this step, you can test your handle to make sure it's functioning properly. Also, you should test the locking mechanism by moving the handle until it is locked position and then back to the locked position.
3. Take off the Screws
A uPVC window handle is an integral part of any home and is often the first thing to show signs of wear and tear or damage. This could be due to natural factors or through regular use and sometimes even intentional damage caused by criminals who may want to open a closed window and gain access to your home. A simple repair can fix the issue and stop it from occurring again.
uPVC handles can also be difficult to open if the locking mechanism isn't working correctly. It's often possible to solve the issue by replacing the multipoint locking mechanism instead of the whole handle. This can save you money.
After removing the old handle, you will need to remove any screws that held it in place. They are usually located on the inside face of the handle base. You may need to use a screwdriver for this and it's crucial that you don't over tighten the screw as this could cause the handle to loosen.
Then, you'll have to locate the pins or screws that hold the handle in place. These are usually located on the inside of the base of the handle. You will need a screwdriver to take them off. If you wish to replace them, you should replace the caps on the screw and test the handle to make sure it is working correctly.
When you're ready for installing the new handle, simply align the spindle with the cutout in the window mechanism and screw it into the appropriate position. Make sure the handle is in the open position and that any screws are tightly fixed before replacing the screws' covers in the event that you want to do so. You're done! Now you can enjoy the new window handle. We hope this will allow you to save money on replacement of your door and window in the future. Contact us if you require more information about this or any aspect of your uPVC window.
4. Fit the New Handle
If you're replacing a damaged handle or simply updating it the procedure is simple and can be completed in a matter of a few steps. The most important thing is to identify the kind of handle, take measurements of its spindle, and determine what tools you will need to complete the job. Safety is always the top priority when working with windows and tools. Be sure to follow the steps and ensure that you have the right handle for use.
To begin, find the screws that hold your window handle. Take them off while holding the handle firmly to stop it from falling and causing an injury. Once the screws are removed, you can put them in a safe place to be replaced later.
After door handle repair that was used previously was removed, you can now begin to install the new one. It is crucial that the handle fits perfectly to ensure it functions correctly and locks the window in position. Next you need to slide the square metal bar attached to the handle into the hole for the window mechanism.
The last step is to replace the caps on the screws and test the handle to make sure it is working. If you're not satisfied with the result or if the window does not open and close as it should the next step is to contact our experts who will be able to assist you.
Almost all UK homes have uPVC Windows. Therefore, a large number of windows will need to be changed at some point because of damage or wear. The process is relatively straightforward and can be completed by anyone with a little knowledge of DIY. The most crucial aspect to the success of this procedure is to ensure that you're using a replacement handle that is compatible with your window's dimensions and style. If you're not sure what kind of handle you'll require, don't hesitate to contact our team who will be able to provide you with the choices available.